SWi12/14TM Innovative mechanical flange spreading wedge

6.0MM – 103.5MM ACCESS GAP

A simple solution to mechanically spread flange joints with a minimum access gap of 6.0mm (0.25″). The SWi12/14TM Innovative Mechanical Flange Spreading Wedge provides a 30% higher spreading capacity to the SW9TM. The tool is smaller, lighter and narrower than the SW9TM. It features a swivel handle, no finger pinch-points and safety lanyard as standard.

THE SW12/14TM MECHANICAL FLANGE SPREADER CAN BE USED DURING:
  • construction
  • commissioning
  • maintenance
SPECIAL FEATURES
  • revolving handle to aid horizontal or vertical spreading
  • offset handle is directly over the center of mass
  • removable handle for improved access
  • revolving lanyard connection point
OPERATING BENEFITS
  • no pinch-points
  • secure hold on each step
  • safety lanyard – 1.0m (39″) length
  • forged key components for strength & reliability

SWi20/25TE Innovative external hydraulic flange spreading wedge

6.0MM – 103.5MM ACCESS GAP

A simple solution to hydraulically spreading flange joints with a minimum access gap of 6.0mm (0.25″). The SWi20/25TE Innovative Hydraulic Flange Spreading Wedge provides a 30% higher spreading capacity to the SW15TE. The tool is smaller, lighter and is narrower than the SW15TE. It features a swivel handle, no finger pinch-points and safety lanyard as standard.

THE SWI20/25TE MECHANICAL FLANGE SPREADER CAN BE USED DURING:
  • construction
  • commissioning
  • maintenance
SPECIAL FEATURES
  • revolving handle to aid horizontal or vertical spreading
  • offset handle is directly over the centre of mass
  • removable handle for improved access
  • revolving lanyard connection point
OPERATING BENEFITS
  • no pinch-points
  • secure hold on each step
  • safety lanyard – 1.0m (39″) length
  • forged key components for strength & reliability
  • fail-safe design – designated cylinder nose seal failure

SWi20/25TE Innovative external hydraulic flange spreading wedge

6.0MM – 103.5MM ACCESS GAP

A simple solution to hydraulically spreading flange joints with a minimum access gap of 6.0mm (0.25″). The SWi20/25TI Innovative Integral Hydraulic Flange Spreading Wedge provides a 30% higher spreading capacity to the SW14.5TI. The tool is smaller, lighter and is narrower than the SW14.5TI. It features a swivel handle, no finger pinch-points and safety lanyard as standard.

THE SWI20/25TI INTEGRAL HYDRAULIC FLANGE SPREADER CAN BE USED DURING:
  • construction
  • commissioning
  • maintenance
SPECIAL FEATURES
  • revolving handle to aid horizontal or vertical spreading
  • offset handle is directly over the centre of mass
  • removable handle for improved access
  • revolving lanyard connection point
  • spread indicator markings for clear precise visual progress feedback
OPERATING BENEFITS
  • no pinch-points
  • secure hold on each step
  • safety lanyard – 1.0m (39″) length
  • forged key components for strength and reliability
  • fail-safe design – designated cylinder nose seal failure

SW9TM Mechanical flange spreader wedge

6.0MM – 81.0MM ACCESS GAP

A simple solution to mechanically spreading flange joints with a minimum access gap of 6.0mm (0.25″).

THE SW9TM MECHANICAL FLANGE SPREADER CAN BE USED DURING:
  • construction
  • commissioning
  • maintenance
SPECIAL FEATURES
  • unique interlocking first step
  • 15mm secure hold
  • minimum access required 6.0mm (0.25″)
OPERATING BENEFITS
  • secure hold on each step
  • safe and easy to use
  • cost effective

SW15TE Hydraulic flange spreader wedge

6.0MM – 81.0MM ACCESS GAP

A simple solution to hydraulically spread flange joints with a minimum access gap of 6.0mm (0.25″).

THE SW15TE HYDRAULIC FLANGE SPREADER CAN BE USED DURING:
  • construction
  • commissioning
  • maintenance
SPECIAL FEATURES
  • unique interlocking first step
  • 15mm secure hold
  • minimum access required 6.0mm (0.25″)
OPERATING BENEFITS
  • secure hold on each step
  • safe and easy to use
  • cost effective
  • portable

SW14.5TI Integral hydraulic flange spreading wedge

6.0MM – 81.0MM ACCESS GAP

A simple solution to hydraulically spread flange joints with a minimum access gap of 6.0mm (0.25″).

THE SW14.5TI INTEGRAL HYDRAULIC FLANGE SPREADER CAN BE USED DURING:
  • construction
  • commissioning
  • maintenance
SPECIAL FEATURES
  • compact built-in pump
  • unique interlocking first step
  • 15mm secure hold
OPERATING BENEFITS
  • secure hold on each step
  • safe & easy to use
  • cost effective

MG7TM Mini-gap flange spreader

2.0MM – 27.0MM ACCESS GAP

For use on smaller, lower pressure flange joints with a minimum access gap of 2.0mm (0.08″). For use on smaller, lower pressure flange joints with a minimum access gap of 2.0mm (0.08″). The tool will provide 6.8T (68kN) of spreading force.

THE MG7TM MINI-GAP FLANGE SPREADER CAN BE USED DURING:
  • construction
  • commissioning
  • maintenance
SPECIAL FEATURES
  • reversible leg design giving greater range of applications
  • unique double angled wedge produces great spreading force without reducing spreading distance
  • robust lightweight tool
  • spreading force of 6.8T (68kN)
OPERATING BENEFITS
  • locks on to flange joint
  • safe operation
  • quick and easy operation
  • saves time
  • saves cost

Valve-Out / Valve-In flange spreader - Kit 1

3/4″, 7/8″ and 1″ bolt hole pins that can handle flange sizes ranging from:
• 2″ thru 12″ 150 series flanges
• 1-1/2″ thru 8″ 300 series flanges
• 1-1/2″ 400 thru 6″ 400 series flanges
• 2″ thru 4″ 600 Series flanges
• 2″ thru 3″ 900 series flanges
• 2″ 1500 series flanges
Kit Includes 2 ea. hard shelled carrying cases

Valve-Out / Valve-In flange spreader - Kit 2

1-1/8″, 1-1/4″ and 1-3/8″ bolt hole pins that can handle flange sizes from:
• 14″ thru 26″ 150 series flanges
• 10″ thru 20″ 300 series flanges
• 8″ thru 14″ 400 series flanges
• 6″ thru 12″ 600 series flanges
• 1-1/2″ thru 6″ 900 series flanges
• 1-1/2″ thru 3″ 1500 series flanges
• 1-1/2″ thru 3″ 2500 series flanges
Kit Includes 2 ea. hard shelled carrying cases